|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type A
|
Duoprop Type A aluminum propellers for DP280, 290.
The unique design of the Duoprop, with its two counter rotating propellers, increases thrust by up to 15%, improves acceleration by up to 30%, and gives greater control at the helm. The propellers thin blade profile demands the highest levels of precision during manufacture. The counteraction of the 3-blade propeller in front and the 4-blade p...
|
|
| From: $387.50Now only: $345.99 |
|
|
|
 |
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type B
|
DuoProp Type B aluminum propellers for DP280, 290.
Volvo Penta developed the Duoprop drive for petrol engines to combine creature comforts with the brute power of high revolutions. The two counterrotating propellers practically eliminate cavitation. The two 3-blade propellers have very thin blade profiles, which demand the highest level of precision during manufacture.
Be sure to try out ...
|
|
| From: $387.50Now only: $345.99 |
|
|
|
|
|
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type C
|
Duoprop Type C stainless steel propellers for DP280, 290.
Volvo Penta s state-of-the-art stainless DP propellers have been specially designed to give maximum thrust where it is most needed - at high speeds in access of 40 knots. Each stainless Volvo Penta propeller is an srt of craftmanship and engineering perfection. Not only do they offer you high performance through thinner blades, powerful ...
|
|
| From: $755.75Now only: $674.99 |
|
|
|
|
|
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type D
|
Duoprop Type D aluminum propellers for DP-S drives.
Volvo Penta aluminum propellers are die cast and dynamically balanced. Die cast propeller blades are considerably more slender than sand cast blades which means less cavitation, greater effect and longer service life.
Be sure to try out our Propeller Guide to find the right Volvo Duo Prop for your engine.
|
|
| From: $387.50Now only: $345.99 |
|
|
|
|
|
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type E
|
Duoprop Type E stainless steel propellers for DPX drives.
A duoprop in stainless steel is simply the best that money can buy for a boat. It is particularly suitable for higher speeds where the requirements for precision and balance are particularly high. The manufacture for such propellers is unique and offers incomparable precision.
Be sure to try out our
|
|
| From: $775.00Now only: $691.99 |
|
|
|
|
|
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type F
|
Duoprop Type F stainless steel propellers for DP-S drives.
Using stainless steel makes it possible to have thinner sections of material in the blades, thus transmitting the force more effeciently. Stainless steel gives the propeller blades greater torsional strength and is more resistant to cavitation damage.
Be sure to try out our
|
|
| From: $764.25Now only: $690.85 |
|
|
|
|
|
|
|
|
|
Volvo Propellers
Duo-Propeller
DuoProp Type G
|
Duoprop Type G nickel-aluminium-bronze (nibral) propellers for DPH drives.
The new DP drive propellers have been specifically developed to handle the tremendous torque and power from the new D4 and D6 engines. Performance is outstanding and the special nickel-aluminium-bronze (nibral) alloy complete with full electric isolation ensures no growth and excellent corrosion resistance.
Be sure...
|
|
| From: $926.50Now only: $837.50 |
|
|
|
|
|
|
|
|
|
|
|
Outboard Boat Propeller
Michigan Wheel Propeller
Apollo® Stainless Steel Propellers
|
Michigan Wheel, stainless steel outboard boat propeller. Apollo® Stainless Propellers are top of the line outboard propellers, known for ultimate performance.
Designed by the leading replacement propeller manufacturer for the past 100 years. A proven combination of performance and durability that will wake up your sterndrive or outboard. Designed to use XHS™ hub system or Mercury s Flo-Torq...
|
|
| From: $258.00Now only: $167.99 |
|
|
|
|
|
|
|
|
|
Outboard Boat Propeller
Michigan Wheel Propeller
Vortex® Aluminum Propellers
|
Michigan Wheel, high performance aluminum outboard boat propeller utilizing the XHS™ hub system.
Vortex® Aluminum Propellers include features such as high performance blade geometry, precision balanced blades, and high powdercoat finish. Designed by the leading replacement propeller manufacturer for the past 100 years.
If you do not have an existing XHS™ hub system or Mercury s Flo-Torq II...
|
|
| From: $73.00Now only: $49.99 |
|
|
|
|
|
|
|
|
|
Outboard Boat Propeller
Michigan Wheel Propeller
Michigan Match® Propellers
|
Michigan Wheel propellers are among the finest propellers available, made from superior materials and by superior craftsmen. In every Michigan Wheel prop you ll find high-strength, fine-grade alloys that ensure longer prop life.
--High gloss black powder coat finish minimizes speed loss from drag and protects aluminum propeller.
--Cushioned rubber hub absorbs impact and reduces the potential...
|
|
| From: $93.49Now only: $60.77 |
|
|
|
|
|
|
|
|
|
Outboard Boat Propeller
Michigan Wheel Propeller
Ballistic® Stainless Steel Propellers
|
Crafted from top-quality 15-5ph stainless steel with a high-luster mirror finish, Michigan Wheel s Ballistic Props not only reliably withstand nicking and bending, but they also offer exceptional corrosion resistance even in the harshest marine environments. They re designed with unique cambered blade sections to ensure better bow lift, greater speeds and smoother, more stable handling.
The uni...
|
|
| From: $412.00Now only: $267.99 |
|
|
|
|
|
|
|
|
|
Outboard Boat Propeller
Michigan Wheel Hub Kits
XHS™ Hub System Kits
|
Michigan Wheel s Xchangeable Hub System (XHS™)absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit.
XHS™ Hub Kits include forward thrust washer, inner hub, and aft drive adapter. These XHS™ Hub Kits are utilzed on the Apollo® Stainless Steel Propellers and Vortex® Aluminum Propellers. These hub kits do not include a ...
|
|
| From: $16.00Now only: $10.99 |
|
|
|
|
|
|
|
|
|
Ski/Wake Boat Propellers
Michigan Wheel Propeller
Ambush 4® Propellers
|
The NEW and IMPROVED Ambush ski boat propellers are 100% CNC machined for the ultimate in accuracy and consistency. Michigan Wheel Corporation developed the CNC machining process for propellers in the mid - 1980 s and revolutionized the way propellers were manufactured. Originally, the CNC machining technology was used to manufacture custom propellers for large mega-yachts where accuracy is critic...
|
|
| From: $475.00Now only: $354.99 |
|
|
|
|
|
|
|
|
|
Ski/Wake Boat Propellers
Michigan Federal Propeller
Dyna-Jet® Cupped - 3 Blade
|
The Dyna-Jet Cupped, which is a Michigan Wheel Federal Series ski boat propeller, is designed for high-power fast bottom boats. These propellers are made of a NiBrAl (Nickel, Bronze, Aluminum) alloy which provides extra strength, less flex, and greater durability. With this model, the trailing edges of the blades are cupped for extra speed. Cupping also adds camber, maximizing thrust, and minimizing vibration of a cavitating propeller.
|
|
| From: $519.00Now only: $387.99 |
|
|
|
|
|
|
|
|
|
Ski/Wake Boat Propellers
Acme Propellers
3 Blade NiBrAl Propellers
|
Precision machined 3 blade NiBrAl propellers by Acme have revolutionized the propeller manufacturing industry. All Acme Propellers are cast in their own North American foundry and 100% CNC machined in one of two QS-9000 manufacturing facilities.
Computer Numerically Controlled milling machines provide an extremely accurate and consistent means for removing metal. This method of production, rela...
|
|
| From: $439.00Now only: $412.66 |
|
|
|
|
|
|
|
|
|
Ski/Wake Boat Propellers
Acme Propellers
4 Blade NiBrAl Propellers
|
Precision machined 4 blade NiBrAl propellers by Acme have revolutionized the propeller manufacturing industry. All Acme Propellers are cast in their own North American foundry and 100% CNC machined in one of two QS-9000 manufacturing facilities.
Computer Numerically Controlled milling machines provide an extremely accurate and consistent means for removing metal. This method of production, rela...
|
|
| From: $469.00Now only: $440.86 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Hung Shen EP-3B Propeller
|
The Hung Shen EP-3B propellers are designed for optimal effeciency, particularly for the craft with speed lower than 25 knots. This type of propeller has high damage resistance due to the thicker leading edge. They are widely used by pilot boats, general pleasure crafts, police launchers patrol boats and similar vessels.
To begin the process of fitting your boat with new Hung Shen EP-3B inbo...
|
|
| From: $495.00Now only: $415.80 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Hung Shen EP-4B Propeller
|
The Hung Shen EP-4B is a 4 blade propeller of exceptional quality. This Hung Shen propeller is designed for optimal efficiency. This type of propeller has high damage resistance due to the thicker leading edge. They are widely used by pilot boats, general pleasure crafts, police launchers, patrol boats, and similar vessels.
In addition, the Hung Shen EP-4B provides relatively low vibration lowe...
|
|
| From: $597.60Now only: $501.99 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel Dyna-Quad Propeller
|
The Dyna-Quad design is as popular as the three blade Dyna-Jet, but generally suggested for vessels larger than 40 requiring greater blade area due to the added weight and thrust requirements. The four blade gives extreme smoothness, superb manueverability, plus the speed and dig of a three blade. This is also an excellent choice for the performance minded commercial boat operators.
0.69 E.A...
|
|
| From: $738.00Now only: $564.57 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel Dyna-Jet Propeller
|
The Dyna-Jet, our most popular propeller, is a good choice for outstanding speed and brilliant performance. It is designed for both the hard working fishing boats to get to their destination on time, to the pleasure craft owner who looks for the ultimate performance and speed. The Dyna-Jet pushes it to the limit.
0.56 E.A.R.
Diameter range: 9 - 46
Pitch range: 0.7-1.1 dia/pitch ratio
...
|
|
| From: $441.00Now only: $337.37 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel DJX Propeller
|
DJX propellers are an evolution of the tried and true Dyna-Jet series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product.
The availability of this series will be progressi...
|
|
| From: $480.00Now only: $367.20 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel DQX Propeller
|
DQX propellers are an evolution of the tried and true Dyna-Quad series propellers. The design has been modified to be better suited to highly loaded, limited tip clearance applications. New manufacturing technologies such as permanent mold casting and/or machine finishing are utilized in manufacture to facilitate accurate, and repeatable product.
The availability of this series will be progress...
|
|
| From: $708.00Now only: $541.62 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel DJ355 Propeller
|
For smaller inboard craft, the 3-blade DJ355 offers the best value for smooth, reliable, and quiet performance. This constant pitch, zero offset series is low maintenance, but meets the performance design criteria of a wide range of applications.
DJ355 propellers are available in certifiable manganese Bronze or NiBrAl material. Standard SAE or metric bores are readily available. Cupped traili...
|
|
| From: $367.00Now only: $291.77 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel DQ469 Propeller
|
In the same design as the 3-blade, the 4-blade DQ469 may be a more suitable choice for a particular application. Under certain loading conditions, or where full keels, tunnels, or pockets affect the water flow to the propeller, a 4-blade may be the better choice to maximize thrust and minimize noise and vibration.
DQ469 propellers are available in certifiable manganese Bronze or NiBrAl material...
|
|
| From: $614.00Now only: $488.13 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
Michigan Wheel M-500 Propeller
|
The M-500 is selected by many operators for new boat construction, repowers, and upgrading of propellers. The excellent design and increased blade area provides superior and higher performance without increasing propeller diameter, which may be impossible to due to clearance or tip speed consideration.
The M-500 is the top choice on installations where heavy vee-struts, dead wood, or other hull...
|
|
| From: $1,940.00Now only: $1,542.30 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
HyTorq MY-T3 Propeller
|
Hardworking commercial and high speed pleasure craft have one thing in common... their need for dependable performance from their propellers. The HyTorq MY-T3 is a propeller designed with both the hard working fishing boat and pleasure craft captains in mind. Designed to handle today s high powered engines with ease... the MY-T3 has a large blade area to enhance performance, and maneuverability. T...
|
|
| From: $536.00Now only: $426.12 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Powerboat Propellers
HyTorq MY-T4 Propeller
|
Manufactured to the same high quality standards as the three blade HyTorq, the four blade HyTorq is the right choice where either or both greater blade area and super smooth operation are desired. The HyTorq MY-T4 was designed with today s high powered engines in mind and built to the exacting standards that make it The Captain s Choice whether they are boating for profit or pleasure. The HyTorq...
|
|
| From: $631.00Now only: $501.65 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Sailboat Propellers
Sailer 3
|
The Sailer 3 is the propeller of choice for the cruising sailboats. It offers superior dock handling maneuverability and the power to maintain speed in wind and waves when the weather gets nasty with a minimum increase in drag under sail.
Our 2-blade and 3-blade fixed pitch propeller series for sailboats are available in diameters of 10 - 24 , in a wide range of pitch. Custom sizes are also po...
|
|
| From: $430.00Now only: $328.95 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Sailboat Propellers
Sailer 2
|
The Sailer 2 fixed pitch propeller is the popular choice for sailboaters seeking to maximize sailing speed. It offers minimum drag while under sail and the power to get you where you re going when the wind stops blowing.
Our 2-blade and 3-blade fixed pitch propeller series for sailboats are available in diameters of 10 - 24 , in a wide range of pitch. Custom sizes are also possible. The typic...
|
|
| From: $344.00Now only: $263.16 |
|
|
|
|
|
|
|
|
|
Inboard Propellers
Sailboat Propellers
MP3 Propeller
|
For the cruiser over 30 , the 3-blade MP propeller has the blade area to get the job done. The thrust provided not only produces cruising performance when the sails are down, but also offers excellent maneuverability while docking.
Our 2-blade and 3-blade fixed pitch propeller series for sailboats are available in diameters of 10 - 24 , in a wide range of pitch. Custom sizes are also possible...
|
|
| From: $385.00Now only: $294.53 |
|
|
|
|
|
|
|
|
|
Cutlass Bearings
Johnson Duramax Cutless® Bearings
Naval Brass Sleeve: Standard Size
|
These cutlass bearings adapt equally well to strut and sterntube mounts, and are often used efficiently as rudder stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication.
External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell.
|
|
| From: $71.48Now only: $39.99 |
|
|
|
|
|
|
|
|
|
Cutlass Bearings
Johnson Duramax Cutless® Bearings
Naval Brass Sleeve: Metric Size
|
These cutlass bearings adapt equally well to strut and sterntube mounts, and are often used efficiently as rudder stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication.
External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell.
|
|
| From: $76.72Now only: $49.99 |
|
|
|
|
|
|
|
|
|
Cutlass Bearings
Johnson Duramax Cutless® Bearings
Non Metallic Sleeve: Standard Size
|
These non-metallic sleeve cutlass bearings feature a dense structure of engineered reinforced thermoset plastic. The specially compounded nitrile rubber is securely bonded to the shell with all tolerances maintained for proper lubrication.
Being non-corrosive and inherently resistant to all known chemicals, oils and greases, as well as being anti-electrolytic, the Duramax non-metallic sleeve b...
|
|
| From: $57.37Now only: $39.99 |
|
|
|
|
|
|
|
|
|
Cutlass Bearings
Johnson Duramax Cutless® Bearings
Non Metallic Sleeve: Metric Size
|
These non-metallic sleeve cutlass bearings feature a dense structure of engineered reinforced thermoset plastic. The specially compounded nitrile rubber is securely bonded to the shell with all tolerances maintained for proper lubrication.
Being non-corrosive and inherently resistant to all known chemicals, oils and greases, as well as being anti-electrolytic, the Duramax non-metallic sleeve b...
|
|
| From: $71.87Now only: $39.99 |
|
|
|
|
|
|
|
|
|
Cutlass Bearings
Johnson Duramax Cutless® Bearings
Flanged Naval Brass Sleeve
|
Johnson Cutless Flanged Type Water Lubricated Bearings are centrifugally cast naval brass with an integral flange for bolting to stern tube or strut housing to retain brearing and prevent rotation in housing. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Shells are heavy walled providing structural strength or step turned if desired.
Johnson Cut...
|
|
| From: Market Price. Call (800) 454-6960 For Quote. |
|
|
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Shaft Zinc Anodes
Inch Sizes
|
Zimar® shaft zinc anodes are individually made to assure the highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
All Zimar® shaft zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
|
|
| From: $13.34Now only: $6.94 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Shaft Zinc Anodes
Metric Sizes
|
Zimar® shaft zinc anodes are individually made to assure the highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
All Zimar® shaft zinc anodes include copper contacts for permanent ground and stainless screws with washer retainers.
|
|
| From: $15.61Now only: $8.12 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Rudder Zinc Anodes
Single Bolt Clamp
|
Zimar® rudder zinc anodes are individually made to assure the highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
All Zimar® rudder zinc anodes include copper contacts for permanent ground and a stainless screw.
|
|
| From: $10.93Now only: $5.68 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Plate Zinc Anodes
Bolt On(Predrilled)
|
All Zimar® plate zinc anodes are cut as per dimensions with specified bolt patterns.
Zimar® zincs are individually made to assure highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
|
|
| From: $16.39Now only: $8.52 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Plate Zinc Anodes
Bolt On(Undrilled)
|
All Zimar® plate zinc anodes are cut as per dimensions. Zincs are undrilled to allow for consumer to drill specific patterns for fastening.
Zimar® zinc anodes are individually made to assure highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
|
|
| From: $10.67Now only: $5.55 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Plate Zinc Anodes
Weld On
|
All Zimar® plate zinc anodes are cut as per dimensions with galvanized steel mounting strips for easy welding or drilling.
Zimar® zinc anodes are individually made to assure highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
|
|
| From: $33.54Now only: $17.44 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Round Plate Zinc Anodes
Bolt on
|
All round plate Zimar® zinc anodes are cast with bolt hole predrilled on center for easy mounting on hull.
Zimar® zinc anodes are individually made to assure highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
|
|
| From: $18.67Now only: $9.71 |
|
|
|
|
|
|
|
|
|
Zinc Anodes
Zimar® Nut Zinc Anodes
Propellers and Bow Thrusters
|
These Zimar® nut zinc anodes are precision machined to fit over specific nut configurations and models.
Zimar® zinc anodes are individually made to assure highest possible zinc concentration and lowest amount of porosity in the zinc market.
Zimar® zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001
|
|
| From: $23.05Now only: $11.99 |
|
|
|
|
|
|
|
|
|
Prop Puller
Walter Machine Company
Plate Puller®
|
Walter Propeller Pullers quickly and safely remove propellers. For more than 5 decades they have been indispensable to commercial divers, boat owners and marine service departments. Any boat on extended cruising with a spare propeller and puller aboard can avoid costly, aggravating and time-consuming delays due to a bent or damaged propeller.
Walter Propeller Pullers simple design can be used ...
|
|
| From: $118.00Now only: $98.99 |
|
|
|
|
|
|
|
|
|
Prop Puller
Minderman Marine
Algonac Scissor Puller®
|
The new Algonac Propeller Puller®, only scientifically designed puller made of high strength, heat-treated chrome steel, is made expressly for the fast, safe removal of propeller wheels. But above all, Algonac Puller® is worth many times its low cost, because it eliminates other crude methods of wheel removal. It does this awkward job simply, easily and quickly, rather than by sledge hammer method...
|
|
| From: $360.00Now only: $289.99 |
|
|
|
|
|
|
|
|
|
Prop Puller
PropSmith™ Propeller Puller
Remove and Replace Propeller
|
The only tool that is both a prop puller and a prop pusher, the PropSmith™ is the preferred tool of marine professionals for simple, secure installation and removal of inboard propellers, regardless of the number of blades or diameter. Used and recommended by quality-conscious yacht builders such as Viking, Hatteras, Cabo, Lazzara, Rampage, Spencer, Jarrett Bay, Delta Marine, and all leading prope...
|
|
| From: $873.00Now only: $683.99 |
|
|
|
|
|
|
|
|
|
|
|
Shaft Seals
Dripless Shaft Seals
Packless Sealing Systems®: Inch Sizes
|
The PSS Shaft Seal Packless Sealing System® is a dripless stuffing box and packing gland replacement for sailboat and power boat drivetrains. The shaft seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion.
How Does The PSS Mechanical Shaft Seal Work?
|
|
| From: $250.00Now only: $191.25 |
|
|
|
|
|
|
|
|
|
Shaft Seals
Dripless Shaft Seals
Packless Sealing Systems®: Metric Sizes
|
The PSS Shaft Seal Packless Sealing System® is a dripless stuffing box and packing gland replacement for sailboat and power boat drivetrains. The shaft seal is a mechanical seal that uses a self-aligning carbon-graphite stator to ensure a 100% watertight seal with proven reliability. This seal will eliminate shaft wear and minimize corrosion.
How Does The PSS Mechanical Shaft Seal Work?
|
|
| From: $250.00Now only: $191.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DML Products Inc® Marine Hardware
Deck Hardware
ReadyCleat®
|
ReadyCleat® is a portable instant cleat that is used as an insert to the rod holder, when a fender is required for docking and no permanent cleat is available along the beam in the cockpit of a boat. ReadyCleat® is inserted into any standard size rod holder, up to 9.5 in depth, providing an instant fender cleat ready for action. Made from high-impact lexan GF to withstand the harsh marine enviro...
|
|
| From: $22.95Now only: $19.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Buck Algonquin® Marine Hardware
Deck Hardware
Pipe Deck Plates w/ "O" Ring Seal
|
Buck Algonquin® Deck Hardware - Pipe Deck Plates w/ O Ring Seal. Furnished with Breaded Chain, Cap and Spanner Key. Available in Cast Bronze Plain or Stainless Steel.
At checkout, in the shipping comments, specify Gas , Fuel , Waste , Diesel , or No Mark, to be stamped on the Flange Plate.
Note - 70PDPS125 is without the O Ring Seal, instead has flat fubber washer.
00PDP125 is not available in Diesel , Waste , or Gas
|
|
| From: $39.25Now only: $27.48 |
|
|
|
|
|
|
|
|
|
|