Outboard Propeller Michigan Wheel Propeller Ballistic Stainless Steel Propellers
|
- Ballistic Boat Props are crafted from top-quality 15-5ph stainless steel prop with a high-luster mirror finish.
- Michigan Wheel s Ballistic Props not only reliably withstand nicking and bending, but they also offer exceptional corrosion resistance even in the harshest marine environments.
- In most cases, these innovative stainless boat props actually reduce RPMs so the engine works more...
|
Prices Starting At: $268.99
|
|
|
|
Outboard Propeller Michigan Wheel Propeller Michigan Match Propellers
|
- Michigan Wheel propellers are among the finest propellers available, made from superior materials and by superior craftsmen.
- In every Michigan Wheel prop you ll find high-strength, fine-grade alloys that ensure longer prop life.
- High gloss black powder coat finish minimizes speed loss from drag and protects the aluminum prop.
- Cushioned rubber hub absorbs impact and reduces the po...
|
Prices Starting At: $61.99
|
|
|
|
Ski Propellers Michigan Federal Propeller Dyna Jet Cupped - 3 Blade Propeller
|
The Dyna Jet Cupped, which is a Michigan Wheel Federal Series ski boat propeller, is designed for high-power fast bottom boats.
- These propellers are made of a NiBrAl (Nickel, Bronze, Aluminum) alloy which provides extra strength, less flex, and greater durability.
- With this propeller, the trailing edges of the blades are cupped for extra speed. Cupping also adds camber, maximizing thrus...
|
Prices Starting At: $440.99
|
|
|
|
Inboard Propellers Powerboat Propellers Hung Shen EP-4B Propeller
|
The Hung Shen EP-4B is a 4 blade propeller of exceptional quality.
- This Hung Shen propeller is designed for optimal efficiency.
- High damage resistance due to the thicker leading edge.
- They are widely used by pilot boats, general pleasure crafts, police launchers, patrol boats, and similar vessels.
- In addition, the Hung Shen EP-4B provides relatively low vibration due to the ...
|
Prices Starting At: $522.99
|
|
|
|
Inboard Propellers Powerboat Propellers Hung Shen EP-3B Propeller
|
The Hung Shen EP-3B propellers are designed for optimal effeciency, particularly for the craft with speed lower than 25 knots.
- This type of propeller has high damage resistance due to the thicker leading edge.
- They are widely used by pilot boats, general pleasure crafts, police launchers patrol boats and similar vessels.
If you do not see the propeller you are interested in, or are ...
|
Prices Starting At: $432.99
|
|
|
|
Johnson Duramax Cutless Bearings Naval Brass Sleeve: Metric Size
|
- These cutlass bearings adapt equally well to strut and sterntube mounts, and are often used efficiently as rudder stock and pintle bushings.
- Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication.
- External brass shells are machined and polished to provide easy fitting.
- Specially formulated oil and chemical r...
|
Prices Starting At: $49.99
|
|
|
|
Johnson Duramax Cutless Bearings Non Metallic Sleeve: Metric Size
|
- These non-metallic sleeve cutlass bearings feature a dense structure of engineered reinforced thermoset plastic.
- The specially compounded nitrile rubber is securely bonded to the shell with all tolerances maintained for proper lubrication.
- Being non-corrosive and inherently resistant to all known chemicals, oils and greases, as well as being anti-electrolytic, the Duramax non-metalli...
|
Prices Starting At: $39.99
|
|
|
|
Zimar Zincs Rudder Zinc Anodes Single Bolt Clamp
|
- Zimar rudder zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
- All Zimar rudder zinc anodes include copper contacts for permanent ground and a stainless screw.
- Zimar Rudder Zincs weigh more than the competition, and peform their cathodic protection job better.
|
Prices Starting At: $5.68
|
|
|
|
Zimar Zincs Plate Zinc Anodes Weld On
|
● All Zimar plate zinc anodes are cut as per dimensions with galvanized steel mounting strips for easy welding or drilling.
● Zimar plate zincs meet the standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.
● Zimar Plate Zincs weigh more than the competition, and peform their cathodic protection job better.
|
Prices Starting At: $17.44
|
|
|
|
Prop Puller PropSmith™ Propeller Puller Remove and Replace Propeller
|
- The only tool that is both a prop puller and a prop pusher, the PropSmith™ is the preferred tool of marine professionals for simple, secure installation and removal of inboard propellers, regardless of the number of blades or diameter.
- Used and recommended by quality-conscious yacht builders such as Viking, Hatteras, Cabo, Lazzara, Rampage, Spencer, Jarrett Bay, Delta Marine, Palmer Johnson...
|
Prices Starting At: $710.99
|
|
|
|
Acme Propeller Cases Case with Puller
|
Weekends always last longer when you carry a spare. There is not a better way to be prepared when you are out on the lake skiing and you need to replace your propeller, so the day does not end early. These propeller cases come with a protective pocket to keep your spare propeller safe, along with the propeller puller, and an extra nut, key and cotter pin. Everything you need to keep the day goi...
|
Prices Starting At: $107.99
|
|
|
|